Every formulation is different. Why settle for “close enough” HPMC?
At KINGMAX CELLULOSE, we produce HPMC at your exact target viscosity – not just our standard grades.
Why Custom Viscosity Matters
| Problem | Standard HPMC | Custom HPMC from KINGMAX |
|---|---|---|
| Open time too short | Viscosity too low | Adjusted to your exact need |
| Mortar too thick | Viscosity too high | Fine-tuned for workability |
| Inconsistent batch results | ±15% variation | ±5% at your target |
| Formula adjustments wasted | Compromise every batch | Perfect fit every time |
What We Can Customize
| Parameter | Range Available | Typical Tolerance |
|---|---|---|
| Viscosity (2% solution) | 400 – 200,000 cP | ±5% of target |
| Particle size | 80 mesh / 100 mesh / custom | ±2% |
| Gel temperature | 60–75°C | ±2°C |
| Substitution type | Standard / rapid dispersion | As specified |
Who Needs Custom Viscosity?
- Tile adhesive makers – Exact open time for your climate
- Gypsum plaster producers – Perfect water retention
- Self-leveling compound formulators – Precise flow control
- R&D departments – Testing specific viscosity targets
How It Works
Step 1: Tell us your target viscosity (e.g., 85,000 cP)
Step 2: Our production team adjusts reactor parameters
Step 3: We produce a trial batch and test
Step 4: You approve, we scale up
Minimum custom run: 5 tons (negotiable for repeat orders)
Real Customer Example
“Our formula needed exactly 75,000 cP. Standard 100,000 cP was too thick; 50,000 cP was too thin. KINGMAX made our exact target. Now our product is perfect every batch.”
— Construction Chemicals Company, UAE
Free Consultation
Not sure what viscosity you need? Send us your formulation or describe your application. Our chemists will recommend the optimal target.
Free sample at your custom viscosity – available for qualified buyers.